基礎情報
モデル番号。 | アルミニウムシュトライフェン - ペニー |
応用 | 輸送ツール、ドアと窓、ガラス壁、ヒートシンク、装飾品 |
認証 | RoHS、ISO9001、ASTM、JIS、GB、EN、ASTMB、SGS、BV |
テクノロジー | 冷間引抜 |
卒業生 | 1000erシリーズ |
気質 | O-H112 |
表面処理 | ミューレンフィニッシュ |
合金 | 合金 |
厚さ | 0,01–600 mm |
幅 | 20~2000mm |
表面 | ミル仕上げ/シュピーゲル仕上げ |
規格 | ASTM-B209。 En573-1、GB/T3880.1-2006 |
財産 | 耐食性、耐熱性 |
包装 | 木製パレットの輸出 |
支払い | 30% Tt アドバンス + 70% バランス調整 |
最小注文数量 | 2トン |
納期 | 7-15 テイク |
調査 | 無料でお試しください |
輸送パッケージ | 標準的な輸出梱包 |
仕様 | 1000系、3000系、5000系、6000系、8000系 |
起源 | 中国山東省 |
HSコード | 7606119900 |
生産能力 | 25000トン/月 |
製品説明
熱交換器フィン用ミルフィニッシュ 1100 純アルミニウムストリップ
仕様:
製品 | 合金シリーズ | 厚さ(mm) | 幅(mm) | 長さ(mm) |
アルミニブルチ | シリーズ 1-8 | 0,3-6 | 50-2250 |
100-11000 mm またはコイルによる |
アルミニウムコイル/ストリップ | シリーズ 1-8 | 0,3-6 | 50-2250/20-800 |
アルミニウムテラー | 3,5,6シリーズ | 6,0-170 | 50-2250 |
アルミトレッド(チェック柄)。 | 1,3,5シリーズ | 0,8-6,35 | 50-2250 |
エンド/タブ材に使用可能 | 5052/5182 | 0,15-0,3 | 20-1600 |
1) Legierung der Serie 1000 (im Allgemeinen als handelsübliches reines Aluminium bezeichnet, Al>99.0 %)。 |
合金 | 1050 1050A 1060 1070 1100 |
気質 | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194等 |
仕様 | 厚さ ≤ 30mm; 幅 ≤ 2600mm; 長さ ≤ 16000 mm OR コイル (C) |
応用 | 蓋倉庫、産業機器、保管庫、各種容器等 |
特殊機能 | 蓋 導電性が高く、耐食性が良く、融解潜熱が高く、反射率が高く、溶接性が良いが、強度が低く、熱処理には適さない。 |
2) 3000 シリーズ合金 (一般に Al-Mn 合金と呼ばれ、Mn が主な合金元素として使用されます) |
合金 | 3003 3004 3005 3102 3105 |
気質 | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194等 |
仕様 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum refers to rectangular plates/coils processed by rolling aluminum ingots, which are divided into pure aluminum and alloy aluminum. Aluminum alloy is an alloy based on aluminum with a certain amount of other alloying elements added, and is one of the light metal materials. In addition to the general characteristics of aluminum, alloy aluminum also has specific characteristics of some alloys due to the different types and quantities of alloying elements added. Brushed aluminum plate: The manufacturing process of repeatedly scraping the aluminum plate out of the line with sandpaper. The main process of the process is divided into three parts: deesterification, sand mill and water washing. In the aluminum sheet drawing process, the special film technology after anodizing can make a film layer containing the metal component on the surface of the aluminum sheet, and clearly show every fine wire mark, so that the metal matte shines with fine hair. Silky sheen.Aluminum plate: The aluminum plate is formed by placing the aluminum plate in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, and performing electrolysis under specific conditions and applied current. The aluminum plate of the anode is oxidized, and a thin layer of aluminum oxide is formed on the surface, the thickness of which is 5 to 20 microns, and the hard anodized film can reach 60 to 200 microns.PS aluminum plate (advertisement aluminum plate, also known as printed zinc plate, newspaper plate): that is, an aluminum plate with a printed pattern on the back and a thickness of 025 or 03.Mirror aluminum plate: refers to the aluminum plate that is processed by rolling, grinding and other methods to make the surface of the plate show a mirror effect.Embossed aluminum plate: it is an aluminum product that forms various patterns on the surface after calendering on the basis of aluminum plate. It is widely used, mainly used in packaging, construction, curtain wall and so on. Detailed Photos Packaging & Shipping